MPS Multifluid 25 bar
MULTIFLUID PIPING SYSTEM AT 25 BAR (360 PSI)
The MPS - Multifluid Piping System range is specifically designed for the distribution of fluids at working pressures of up to 25 bar. The increased working pressure allows the safe transport of incompressible fluids, such as mineral and synthetic oils, and coolant-lubricant fluids.
For these types of applications, TESEO uses its patented APS pipework – suitable for the distribution of non-hazardous gases and fluids – in combination with a range of dedicated accessories, such as safety valves, pressure gauges, and expansion tanks.
KIWA has confirmed that the product complies with the requirements of Directive 2014/68/EU, Annex III, E1 for pressure equipment.
KIWA Certificate No.: PED 0042. CE Marking: CE0476
The following advantages stand out
- Ideal for mineral and synthetic oils ;
- Quick and safe to assemble;
- Simplified profile with four identical faces;
- Efficient, strong and long-lasting;
- Modifications can be made without waste;
- 100% recyclable aluminium;
- Modern design.
Compatibility with fluids
Compressed air, Vacuum,Argon, Nitrogen, Carbon dioxide, Mineral oil*,Synthetic oil*, Other fluids*.
*For further information, please apply to Teseo Srl Technical Office.
Technical characteristics
- Extruded Aluminium: Alloy EN AW 6060 UNI EN 573-3:1996
- International designations: ANSI 6060 - DIN 1748/1: AlmNsl 0,5 BS 6060
- Chemical composition: Si: 0,45% - Mg: 0,45% - Fe: 0,3%
- Heat treatment: Aging T5 o T6
- Surface treatment (upon request) : Chemical silver anodization
- Specific weight, density: Kg/dm3 2,71
- Electrical conductivity: % IACS 53
- Thermal Conductivity: W/m.K 200
- Specific heat: J/Kg.K 96
- Coefficient of expansion: mm/m °C 0,024
- Tensile strength: Kg/mm2 24
- Yield strength: Kg/mm2 20
- Modulus of elasticity: Kg/mm2 6.700
- Brinell hardness: HB 70÷80
- Melting range: °C 600-650
- O-ring material: NBR 70
- Operating temperature: °C -20/+120
- Screw material: Steel Class 8.8
- M5 Screw driving torque: 10 N·m (90 Inch·Lbs) ± 10%
- M6 Screw driving torque: 14 N·m (120 Inch·Lbs) ± 10%
- Outlet thread: BSP or NPT
- Terminal thread: BSP or NPT
- Max operating pressure: 25 bar - 2,5 MPa - 362 psi
- Failure test pressure: 80 bar - 8 MPa - 1160 psi
blue design
The new generation of “blue” in TESEO is the result of the modification and the improvement of all the Teseo systems. Our continuous research into Energy Saving together with a high regard for the Design ruled our technical choices. We studied the internal passages and the thicknesses to increase the flow rate.
Double seats for the O-rings and high quality NBR Blue O-Rings, manufactured for Teseo, are applied to all the connections for a better sealing.
Ergonomics of the complete system has been improved thanks to optimization of the shapes and weights. Precision manufacturing carried out on many components improves the outer finishing and removes the die-casting defects.
Outlet plates plates have been re designed with new moulds, to improve quality and accuracy. The blocking parts have been analyzed and improved.
The implementation of accessories and components is continuous.
Teseo are sourcing New certifications and international confirmation.
