This accessory absorbs the pressure peaks caused by hammering due by pumping of pneumatic pumps or quick shutting of sectioning valves in the piping system (hammering shock adsorber).
The installation of this ihready to fitla kit is very easy and simple. Drill a hole into A, no bigger than the maximum diameter of 15 mm, deburr the hole edges, cleaning cut metal parts that may damage the Oring inside B. Fit B on A, centering the hole, tightening the screws with a torque between 6 and 10 N.m.
If necessary, it is possible to charge the tank with nitrogen using the valve C.
Technical Data:
Max working pressure: 210 bar
Volume: 0.35 liters
Weight: 1.7 Kg
Flow rate: 35 l/min
|